Improved G.I. Joe Classified figure stands (GI Joe)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made some improvements to my G.I. Joe stands, adding a bevel, making the peg smaller, updating the logos.
- Ocena
- 5 / 5
- Polubienia
- 32
- Pobrania
- 328
- Wydruki
- 1
- Wyświetlenia
- 2383
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Share Alike
After tinkering with my first stands I made some changes to make them better. Added a bevel. The old model had tight pegs so I made them smaller (2.85mm diameter). Included is a plain base, a GI Joe star, a Cobra logo (model for logo modified from dSASQUATCH707 on thingiverse), and Arashikage ninja clan.
I recommend printing in PETG. When I used PLA the pegs tended to snap off with use.
I've found the heel holes are fairly inconsistent between figs, so I went with 2.85 which works great on the tight ones (Stormshadow and Cobra Commander) but they might be a little loose for others. If they are too loose for you I would recommend using a 50 -100 um offset in your slicer.
I really liked the way these pop with a filament change I just use PursaSlicers color change feature to do this. Attached pictures I used Overture PTEG Sparkle Blue and MakerGear PTEG Red For the cobra and ninja. Overture Transparent green PTEG and Overture white PETG for the Joe star.
I used ironing on all top surfaces, but used added 50x50x5 modifier rectangle at 5mm with an ironing modify to turn off ironing on the top of the pegs. I would not recommend ironing the tops of the pegs.
I skipped Ironing on the green Joe stands and they weren’t bad but I think the Ironing does make a nice difference