Computer Case Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted to raise my computer case up to allow more air flow through the bottom of the case, and to add an LED strip…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 879
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I wanted to raise my computer case up to allow more air flow through the bottom of the case, and to add an LED strip underneath.
The feet are 40 mm diameter by 40 mm tall. The inner cut out is 34 mm diameter by 10 mm deep. The infill is 50% for strength.
Print instructions
Unassociated tags: computer feet
Category: Computer Summary
I wanted to raise my computer case up to allow more air flow through the bottom of the case, and to add an LED strip underneath.
The feet are 40 mm diameter by 40 mm tall. The inner cut out is 34 mm diameter by 10 mm deep. The infill is 50% for strength.
Print Settings
Printer Brand: Prusa
Printer: Prusa Mk2
Rafts: No
Supports: No
Resolution: 0.3
Infill: 50%