1 / 1
Gloomhaven Vermling Raider (Resin pre-supported and back-adjusted version) — zdjęcie 1

Gloomhaven Vermling Raider (Resin pre-supported and back-adjusted version)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This remix is a pre-supported version for resin printing of the original model.

Ocena
5 / 5
Polubienia
14
Pobrania
161
Wydruki
1
Wyświetlenia
637
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This remix is a pre-supported version for resin printing of the original model. Supports were created manually in Lychee slicer and successfully test-printed.

Note

The original model had parts of the spears coming out of the back, which I did not like, so I created a version without those ("back adjusted" files). The adjusted file is available without pre-supports here as well.

The supported versions of the original and "back adjusted" files are identically, except for a few additional supports for the spears coming out of the back.

Post-Printing

To remove the supports, use your wire cutters to clip them off the

  1. bottom of the feet
  2. tail
  3. knife
  4. spear

Then you'll be able to pull the rest of the supports off without further clipping.

Tagi