Wagner Heat Gun Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
🔥🔥🔥
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 124
- Wydruki
- 0
- Wyświetlenia
- 945
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Heat guns are fantastic tools for cleaning up 3D prints - just a SHORT hit of hot air from one will clean up the majority of tiny stringing between features or parts. This is especially useful when printing with more stringy materials like PETG.
This can be printed with supports under the overhangs, but you can also omit then and let this print double as an overhang test (it's a 32.2 degree overhang). There's a cutout on the bottom that fits a 51 x 12.75 x 6.3mm magnet. I used 0.2mm with variable layer height in areas to make the curves look better, but things should be just fine @ 0.3mm.
This fits a Wagner model 0503172 heat gun, which should be roughly the same dimensions as this one.