Neon 3D Benchy Sign (EL Wire)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
effective way to create layered Neon Sign
- Ocena
- 0 / 5
- Polubienia
- 71
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 1260
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a very easy and cheap way to make a layered neon sign of 3D Benchy ⛵
The wire I used is called EL LED Wire and you can get one at amazon, ebay, aliexpress…
I got one here (costs around $7):
https://www.amazon.com/dp/B0B464B3TY
The wire I used was 3m long and about 2mm thick. There was plenty leftover and it can be cut away at any point.
Just make sure you start here and push the wire all the way through.
Then you just push it into the grooves (you can use something dull to help).
It might look difficult but it is self explanatory. It is not permanent so you can use the wire on another project.
Have fun