1 / 4
Mosaic Palette adapter for direct drive Artillery Printers
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter will work for all the Mosaic Palette 2 and 3 versions. For the Artillery Sidewinder X1/X2 and Genius/Pro
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 667
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is an adapter to work with the Artillery Sidewinder X1/X2 and the Genius. It allows you to mount the Bowden tube to all versions of the Mosaic Palette 2 and 3. To install you need to remove the short piece of PTFE tube that is above the extruder gear in the stock tension arm. Slide the adapter into the side of the tension arm then reinstall the PTFE tube. That will lock the adapter in place. Print the part upright but up side down. With supports