Picture holder (also for sloping walls) - 4 sizes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Elegant and simple way to hang pictures. Even on sloping walls.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 334
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Share Alike
When I recently wanted to hang two pictures on a sloping wall in the attic, I faced a problem. How do I do that?
I found solutions in web shops, but they were all outrageously expensive.
So again DIY with the help of my 3D printer. :-)
The frames of my pictures have a 17mm contact surface. This is how a picture holder for a support surface of 17.5mm was created. For variable purposes I then created a total of four sizes: 10.0, 12.5, 15.0 and 17.5mm. If you need other sizes, let me know in a comment.
PRINTING INFORMATION
Layer height: 0.20mm
Infill: 15%
Supports: yes with the holder
I'M LOOKING FORWARD TO YOUR MAKES! :-)
If you like this model, feel free to check out my others here.
And maybe you would like to support me with a small donation. Feel free to use the support button on the top right of this page. I myself donate one or two Euros to each designer for an interesting model that is worth five stars to me.