Porch Door Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed this as a replacement for a broken porch door handle. Upper and lower part fit together tightly, though some…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 133
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Designed this as a replacement for a broken porch door handle. Upper and lower part fit together tightly, though some experimentation with horizontal expansion (a Cura setting for horizontal offsets) may be required to get a good fit (I settled on -0.1, though that may be far from what you need). While I printed a prototype in PLA, I would recommend you print these parts in PETG due to its superior weather resistance.
I would also recommend dialing in your linear advance factor (or use coasting), otherwise the parts may not fit together at all.
Printing instructions:
This part is designed to be printed with a line width of 0.5.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
200
Infill:
50
Filament: Extrudr PETG White
Category: Replacement Parts