Gloomhaven Blood Tumor (Resin pre-supported)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This remix is a pre-supported version for resin printing of the original model.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 165
- Wydruki
- 3
- Wyświetlenia
- 629
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This remix is a pre-supported version for resin printing of the original model. Supports were created manually in Lychee slicer and successfully test-printed.
The original file had several holes in the bottom, which I did not want, so I filled them up. If you want those back, you can use the "Browse file" feature of Lychee to replace the STL with the original model, but you might need to remove supports that touch those holes or add new ones potentially.
Post-Printing
To remove the supports, use your wire cutters to clip them off the veins at the bottom, then you'll be able to pull the rest of the supports off without further clipping.
I lightly sanded the bottom and used it without a base.