1 / 5
Print in place 4 x 18650 spring loaded battery holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a easy to print and easy to use 4 x 18650 li-ion battery holder
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 229
- Wydruki
- 1
- Wyświetlenia
- 2063
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (46)Powiązane
I will use this battery holder to charge my batteries using 4 x TP4056 or you can use 2 x TP 5100
I wanted to be strong and reliable so I print it in Sunlu Black PETG with :
0.4 nozzle
0.2 Layer Height
4 Perimeters
5 Top
5 Bottom
and it came out in 47.41 g
it uses @ 15 m of filament
and the main advantage is that the cells after connecting them is not lose even if you shake the support! the cells stay in place, they don't fall off
thanks to K014 for the great design