Christmas Napkin Ring Set, 8 different pieces
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print it. Put the napkin inside the ring to get an elegant look on your Christmas dining table. Enjoy! Ho ho ho!
- Ocena
- 5 / 5
- Polubienia
- 107
- Pobrania
- 554
- Wydruki
- 7
- Wyświetlenia
- 1613
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial
https://www.buymeacoffee.com/maxt
----------------------
8 different pieces - Mix and match as you please, or print'em all! :)
Flat bottom to ensure that the napkin ring doesn't rotate on the plate.
This set goes well with another way to decorate the napkins - Merry Christmas Gnome - Napkin Decoration
The model set will fit on Prusa Mini+ (180x180)
Feel free to size it up or down as you wish
Print it face down, or simply use the attached 3MF/GCODE files.
Print: 0.2mm
Nozzle: 0.4mm
Perimeters: 2
Support: Not needed
Brim: Not needed
Infill: 15% (just to ensure sturdiness)
Minimum shell bottom, top: 0.6mm
A tip: If you want to get this print easily off your heat bed, place the heat bed with the printed model in the freezer for 10 to 30 mins. Take it out, and it should pop off quite easily without any breaks/cracks, as shown on the photo below :)
Happy Printing!
--------------