Password Pump Rev 2 Case and Lid, Joystick Model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for Dan Murphy's Password Pump Rev 2
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a case for the Password Pump V2, Joystick Model, created by Dan Murphy. The kit, and the fully assembled unit, is available on Tindie at the Password Pump Store (https://www.tindie.com/stores/passwordpump/). The one pictured is mine. There is a saying: "If you can remember all your passwords, you are probably doing it wrong."
It's difficult to attach the standoffs inside the case, so I used an M2 screw and nut to hold the standoff for assembly – see the pictures.
I moved this from Thingiverse – they won't allow downloads while using a VPN or Ad blocking software. Also all the files had disappeared from this particular model. If you have any issues, post a comment and I will do my best to fix the problem.