Doublesided Reindeer Ornament MMU & Single Extruder Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flat printed Ornament of a Reindeer. The Design is visible on both sides.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution
I uploaded a couple of versions.
The Single.3mf is “the original” where i have a lot of bodies, assign them to a colour (you either need 4 extruders, or set up your single extruder to be 4) and then print it.
Yes there are a lot of filament changes if you do them by hand. Tip: Write down the filament order and cross them off :)
The reindeer.stl is just the created stl from said bodies. You need to color them in yourself if you want to do that. I tried that in PrusaSlicer , but after slicing the colors did not fit, so do this at your own risk and experience. Maybe you have a better setup for your slicer.
The shown make is made by single extruder, lots of filament changes, and the single.3mf 0.4mm nozzle and 0,2mm layers in PLA.
Please post a make if you do it. Happy Printmas.