ZY12PDN Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple mount for the ZY12PDN USB-C Power Delivery module. It allows you to mount the board in your project…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is a simple mount for the ZY12PDN USB-C Power Delivery module. It allows you to mount the board in your project without resorting to hot glue, and the cover prevents the button on the top from accidentally being pressed once everything is configured. I've also left a space towards the rear of the PCB so that the solder joints on the bottom don't lift up the board.
Tolerances are intentionally tight so the board with snap into the frame, so depending on your printer you might need to play with the scaling slightly. The holes and nut capture are sized for M3.
Notes:
I'm not sure how hot the module actually gets in operation, so I printed the parts in PETG to be safe.