Time Crisis Named Lightgun Gun4IR GX16 adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Time Crisis 1 Named (clone lightgun), adapter for GX16 connector
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 169
- Wydruki
- 0
- Wyświetlenia
- 3959
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is for people who want to modify a Time Crisis 1 clone arcade lightgun to use a GX16 connector and their own cable instead of the fixed shower hose that comes with the gun, without having to widen the original hole.
Model should be printed in the original position. You will need to use supports everywhere except in the GX16 threading area. Put a support blocker there.
Print in 0.12mm layer size. There will be stress on this part so I recommend 50% infill.
Part might be a little too big depending on your printer tolerances, this is the closest to perfect that I got.
Have fun!