Smaller Wheel for Strider Bike
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A smaller wheel for strider bikes to accommodate children with shorter legs
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 403
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this rim and tire combo to replace the wheels on a strider bike for children with smaller legs. This wheel is approximately 8" in diameter (200mm actually)
The rim I printed with PETG and requires supports. I used 4 perimeters for strength.
The tire was printed in Ninja Flex TPU with 2 perimeters and 20% infill, feels like a realistic amount of squish.
The inner race spacer keeps the bearings from taking too much preload.
The tire needs to be stretched slightly over the rim and the interface is keyed to keep the tire from slipping.
Parts List
| Part | QTY | Material |
| SmallerRim | 1 | PETG |
| SmallerTire | 1 | TPU |
| InnerRaceSpacer | 1 | PETG or PLA |
| 608 Bearing | 2 | Steel |
Happy Printing!
Disclaimer: NOT tested for strength. Only meant for small children to push the bike around inside. Use at your own risk.