Thrustmaster (T80/T150/F430) 2 pedal set - replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacemnt part for the 2 pedal set from thrustmaster. I have made 40 and 42 gear variant. I found that both variants…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 123
- Wydruki
- 1
- Wyświetlenia
- 1350
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
Replacemnt part for the 2 pedal set from thrustmaster.
I have made 40 and 42 gear variant. I found that both variants worked reasonably well, results may vary.
For easyer printing i reduced the sholder from the original design aand added the washer,
needs two - one for either side of the pedal
Place the firs top tooth of the pedal gear in the space of the 3rd and 4th tooth of the potentiometer gear from your pedal set. DON`T FORGET TO RECALIBRATE YOUR WHEEL
(just pull the USB plug, and reinsert it - i was batteling the calibration issue for days)
STEP file included.
Print Settings
Printer:
GEEETech i3 pro B
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
15
Filament:
DevilDesign PETG
any
Category: Other