1 / 4
REMIX Kobo Glo + BlueFly Vario housing plexiglass addon
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added hinge only to the lid (since the base was already printed) and a latch, to attach a plexiglass/perspex…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 244
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Added hinge only to the lid (since the base was already printed) and a latch, to attach a plexiglass/perspex protection for the fragile Kobo screen.
All you need is a piece of 2mm thick plexiglass/perspex cut to dimmetion 15.5mm x 11.5mm and glue everything on the plexiglass/perspex, also you can add two small screws to the bottom part of the hinge.
Supports only needed for the inner part of the hinge (print the lid upside down)
Category: Sport & Outdoors
