Pipe Stool Leg Glide
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed to extend some stool legs to fit a non-standard size bar so whipped up these glides to fit into the standard…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed to extend some stool legs to fit a non-standard size bar so whipped up these glides to fit into the standard 1/2" EMT pipe I used to do it.
The 8.3-deg glide angle was set to match my barstools, but it should work through customizer for angles between 0 and 20+ deg without issue.
Here's a link to the 90-degree flat remix, since that is such a common need: http://www.thingiverse.com/thing:865392
Print instructions
Category: Kitchen & Dining Summary
I needed to extend some stool legs to fit a non-standard size bar so whipped up these glides to fit into the standard 1/2" EMT pipe I used to do it.
The 8.3-deg glide angle was set to match my barstools, but it should work through customizer for angles between 0 and 20+ deg without issue.
Here's a link to the 90-degree flat remix, since that is such a common need: http://www.thingiverse.com/thing:865392