Creality Sonic Pad improved accelerometer sensor bracket for Ender3 S1 & Ender3 S1 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows the sensor to be permanently mounted to a plate which can be attached quickly to the toolhead or buildplate.
- Ocena
- 5 / 5
- Polubienia
- 168
- Pobrania
- 2008
- Wydruki
- 5
- Wyświetlenia
- 9883
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was frustrated by the need to re-attach the screws to the standard Creality bracket whenever I need to run input shaping with my Sonic Pad.
So I created a version which simply slots in (firmly) to a semi-permanent bracket on the toolhead.
To make it even better, the bracket can easily be clipped to the bed when detecting resonances on the Y-axis.
The print should be made at high quality (recommend 0.12 layer height) with tight tolerances. There is only 0.2mm gap in the models so that the fit is tight (but just removable by hand). Obviously, it wouldn't work if the bracket had wobble within itself.