1 / 1
Andrei's Cam Clip at 0.75 scale — zdjęcie 1

Andrei's Cam Clip at 0.75 scale

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A scaled down version of Andrei's famous Cam Clip, enhanced tolerances, plus storage facilities

Ocena
5 / 5
Polubienia
9
Pobrania
91
Wydruki
2
Wyświetlenia
466
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
GNU General Public License v3.0

This is a scaled-to-0.75%-version of Andrei's famous cam clip (https://www.printables.com/de/model/27216-bag-clip-print-in-place-cam). The tolerances of the original model were a wee bit too tight for my printer, so I enhanced them a bit using Shapr3D (not the most accurate modeling software but nice on the iPad).

The resulting model prints just fine at 0.2mm, it needs some support around the hinge parts (touching buildplate only, paint-on supports recommended), it takes a bit of force though to initially break the moving parts free.

I added 2mm holes through the axles (may need a bit of drilling) to reinforce the axles with filament strips flattened with a hot nail head, thus preventing breaking axles. If you feel you do not need them, print the model without the holes.

And to round it off I enclose a storage facilities for 5 clips each to keep things tidy in your kitchen drawer :) (two possible orientations, model B might offer just a bit better “grip” when removing a clip). Both storages print best in the orientation as-is,  layer height to your liking, no support, no infill. Use double sided tape to fix them wherever you need them.