1 / 3
Rinnai Hot Water Heater Cleaning Vacuum Attachment — zdjęcie 1
1 / 3

Rinnai Hot Water Heater Cleaning Vacuum Attachment

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A vacuum attachment to assist in cleaning out a Rinnai tankless hot water heater

Ocena
0 / 5
Polubienia
17
Pobrania
54
Wydruki
0
Wyświetlenia
450
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

Our hot water stopped working one day and I discovered the burn buried in carbon dust. Not wanting to remove the whole burner, I created this narrow, curved vacuum attachment to suck up as much dust as I could and blow the rest out with my shop vac.

Printed in PLA at 0.3mm layer height, build plate supports for the curve. I would recommend gluing the coupler. I have included a file with it as one single piece if you'd like to try printing it like that. I broke it apart to reduce support material needed. If I reprinted I would probably do it in PETG

Tagi