1/2" EMT pipe closet door shoe rack brackets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
*UPDATE 2017apr26:the girl said they didn't fit her dainty shoes, so I dropped to 82mm (from 92mm) and put a covering…
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 153
- Wydruki
- 0
- Wyświetlenia
- 1485
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
*UPDATE 2017apr26:the girl said they didn't fit her dainty shoes, so I dropped to 82mm (from 92mm) and put a covering of 1/2" copper water pipe insulation as a cushion and she loves it. As a test I put my shoes in and they fit fine too, so I suggest to print the 82mm version I just uploaded instead as they're more versatile. EMT hackers of the world, enjoy !*
Remix of shoe rack brackets but uses standard cheap US 1/2" EMT pipe (approx $3 per 10' stick) instead of 10mm rod and includes additional tapered bracket (required to clear door jam when mounted on indoor closet door, since door is hollow and bracket must be mounted close to edge).
No customizer provided as I just quickly hacked @ZhenyaKa script to get results I needed but if the STLs don't work for you (you'll have to rotate the models 180 in slicer and lay flat), the SCAD for each is included.
Enjoy !
-=dave
Print instructions
Category: Organization Summary
*UPDATE 2017apr26:the girl said they didn't fit her dainty shoes, so I dropped to 82mm (from 92mm) and put a covering of 1/2" copper water pipe insulation as a cushion and she loves it. As a test I put my shoes in and they fit fine too, so I suggest to print the 82mm version I just uploaded instead as they're more versatile. EMT hackers of the world, enjoy !*
Remix of shoe rack brackets but uses standard cheap US 1/2" EMT pipe (approx $3 per 10' stick) instead of 10mm rod and includes additional tapered bracket (required to clear door jam when mounted on indoor closet door, since door is hollow and bracket must be mounted close to edge).
No customizer provided as I just quickly hacked @ZhenyaKa script to get results I needed but if the STLs don't work for you (you'll have to rotate the models 180 in slicer and lay flat), the SCAD for each is included.
Enjoy !
-=dave