Winter Ski Slope Centerpiece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My first really detailed model! In the Ski slope you can actually add in a black piece of filament as the ski lift!
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 1053
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial
In this model you can actually insert a piece of filament into the ski slope lift holders and mechanisms at the top of the hill and the bottom!
READ FULL DESCRIPTION
Please please please slow down the print to 60 percent when you get close to printing the ski lift holders because they will warp when they are printed at a faster rate.
The Centerpiece holder (Tray) Is printed in two parts and slide together. Do not use excessive force because you can break the inserts. Use caution and take your time when putting them together.
The Ski slope uses a Square Circle And Triangle connection and is easily able to slide together.
This filament size inserted into the ski lift is recommended to be from the leftover brim piece from the centerpiece holder.
You can cut the brim piece to the length needed to fit into all the holders. No glue should be necessary but can be used if needed.
A normal 1.75mm size will be hard to fit in and may result in snapping off the lift holders.
BECAREFUL!
THE LIFT HOLDERS ARE VERY FRAGILE AND WILL BREAK WITH EASE.
Use caution when taking it off the printer and moving it around.
Feel free to paint it when you are done. I know I enjoy that :)
Thanks for looking at my model.