Gnome Roller Cookie Cutter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have designed a Roller cookie cutter with a Christmas Gnome figure
- Ocena
- 4 / 5
- Polubienia
- 19
- Pobrania
- 88
- Wydruki
- 2
- Wyświetlenia
- 663
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Update 01: I had to switch the second screw thread direction(I designed it wrong), and added a fillet to the handle to be more sturdy.
Print settings: I would recommend at least 55% infill for the screws and handle, other parts print as you like. I used supports everywhere for the cookie cutter body, and no support for the other parts.
This roller cookie cutter has a edge about 5 mm height and also some emboss details as well.
In a couple of days I will provide a printed version as well.
I did upload 2 version of it.
- Version 1 can be printed on any printer with the bed dimensions higher than 180 mm.
- Version 2 can be printed on any printer that has a bed at least 100 mm.
It a easy assemble using the screws that can be 3D printed as well.