MG995 Upright Mount & Pulley For Automated Blinds
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After following Ben's https://www.youtube.com/watch?v=8bcYB-0bctE DIY Automated Blinds, I wanted to replace the pieced…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 64
- Wydruki
- 0
- Wyświetlenia
- 718
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
After following Ben's https://www.youtube.com/watch?v=8bcYB-0bctE DIY Automated Blinds, I wanted to replace the pieced together base with something more stable and better looking. This is a self-designed housing for a MG995 servo and makes use of the G-Clamp from here: http://www.thingiverse.com/thing:1673030
The pulley works well for pulling the blind cords when double looped.
Print instructions
Category: DIY Summary
After following Ben's https://www.youtube.com/watch?v=8bcYB-0bctE DIY Automated Blinds, I wanted to replace the pieced together base with something more stable and better looking. This is a self-designed housing for a MG995 servo and makes use of the G-Clamp from here: http://www.thingiverse.com/thing:1673030
The pulley works well for pulling the blind cords when double looped.
Print Settings
Printer: Qidi Tech I
Rafts: No
Supports: Yes
Resolution: 0.2mm
Infill: 25%
Notes:
PLA
Oriented the housing onto it's sides and used supports.