Taboretum Spool Holder (608 bearings, 2020/2040 extrusion mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Low profile bearing filament spool holder mounted directly to printer frame (2020/2040 slot type) with 608 bearings.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 717
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Over the years I've been using dozens of different spool holders, including fairly exotic ones. The best option was a minimalistic holder sitting on top of my Kossel Delta Mini. I wanted something similar for my current Ender 5.
I've designed a simple holder to be mounted on vertical extrusion, as this is an element of many modern printers. It works for 2020 (single bolt mount) and 2040 (two bolts mount).
Bill of Material
- printed parts
- 1x bottom_bracket
- 1x top_bracket
- 2x roller
- 3x plug (optional)
- hardware parts
- 3x 608 ball bearing
- 2x (or 4x for 2040 extrusion) T-slot drop in nuts M4 and M4 8mm+ bolts
If you like my designs do not hesitate to visit my YT channel :) - @taboretum
Printing instructions
- no supports needed
- print items oriented “as is”
- use any filament (I've printed in PLA)
Assembly instructions
- Make sure the rollers are smooth, use sandpaper if needed. No mercy for blobs :)
- Push-fit 2 rollers on 2 608 bearings, this is a tight fit!
- Push-fit your roller-dressed bearings on the bottom bracket.
- Push-fit the third bearing on the top bracket.
- If your plastic is not very firm and springy use the three plugs to stiffen bearing mounts. Don't press very hard - it might be impossible to remove them!
- Mount the bottom bracket at the bottom (single-hole hexagon facing downwards).
- Mount the top bracket above and adjust its height to you spool size.
- leave some comments, post your makes, like it if you like it :)