Lego Duplo Brick Collection with Parametric Source Files
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Missing some Duplo bricks? Just generate it and print it! You can also create custom Duplo tiles as well!
- Ocena
- 4,8 / 5
- Polubienia
- 279
- Pobrania
- 3325
- Wydruki
- 25
- Wyświetlenia
- 7551
- Oceny
- 20
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 2024.12.05. – I updated the source file for better results.
I measured, designed and printed lots of Duplo bricks to bring you the ultimate, well-tested Duplo Brick Creator. I started out from a Fusion 360 design I found out in the wild (unfortunately I cannot find it now) and improved it further. I measured every brick's dimension and adjusted the model sizes and tolerances according to fit the Duplo bricks perfectly and the clutch force should also be the same as with a Duplo brick.
I also used these resources for the exact sizes:
https://bricks.stackexchange.com/questions/288/what-are-the-dimensions-of-a-lego-brick
and mainly this:
You can make your own, never-existed Duplo bricks sizes with this parametric Fusion 360 design. I also included some pre-generated files with the most common brick models.
I included the editable .f3d file so you can import it into Fusion 360 end experiment with the parameters. Height, Depth and Width is self-explanatory, but you can also edit some other dimensions such as tolerances, offsets, etc. Sometimes you need to adjust the generated extrusions on the inner stiffeners or you can just suppress that feature.
If you want to generate Duplo tiles, it is also possible. Just hide the pin (stud) extrusions and the plain top of the brick remains.
The pre-filled parameters should be good though with a well calibrated printer but after printing a test piece you can tune the parameters for your needs. I recommend PET-G for printing.
Duplo Hinge Brick!
I published the Duplo part you were missing: the Duplo Hinge! It is a print-in-place model and needs a well calibrated printer but the outcome is rewarding!
Feedback is important!
I spend countless hours perfecting and testing my designs and I would love to hear your feedback too. If you like my designs I appreaciate a like or a comment. Please post a photo if you print this.
Donations
I am open to any kind of donation if you want to support me :)
https://paypal.me/andrasbognar