1 / 6
Filament Table Stand With Screw Holes, Up to 2kgs — zdjęcie 1
1 / 6

Filament Table Stand With Screw Holes, Up to 2kgs

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Filament stand with two bar types, screw holes, made for up to 2KG spools

Ocena
4 / 5
Polubienia
6
Pobrania
43
Wydruki
0
Wyświetlenia
325
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Are you tired of adjusting the Prusa Mini spool holder size when swapping from 1KG to 2KG spools? Then this is the spool holder for you! This stand can accommodate up to 2KG spools and is easy to swap out. The angled ends of the beams will keep them secured and centered on the base while printing.

Cross beam 1 has a middle divider to prevent 1KG Prusament from shifting too far back and forth during printing. For spools that don't have a gap in the middle (ex. Hatchbox), Cross Beam 2 is required for use.


The screw holes are designed for any length #8 screw.

 

Printing tips: 
- Supports are NOT needed for any part (including cross beams)
- All parts can be printed on a Prusa Mini
- Works well with PLA or PETG


Personal use experience:
- Printed in PLA, has worked great and shows no sign of degradation (current use time ~5 months) 
- Secured with 1" #8 screws

Tagi