1 / 9
spiggytech chassis for ASRock X300TM-ITX V2 w/ Carry Handle — zdjęcie 1
1 / 9

spiggytech chassis for ASRock X300TM-ITX V2 w/ Carry Handle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

complete 3D printed chassis for ASRock X300TM-ITX, New design with a carry handle

Ocena
0 / 5
Polubienia
11
Pobrania
47
Wydruki
0
Wyświetlenia
718
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Updated 6/3/2023

Added screw holes for TPU feet. Also added feet to be made in TPU. 

 

Redesigned it from the ground up. This project is a work in progress

I took the strong points of the original design and revamped it in such a way that printing should be easier to do. There are more parts, but it also enables the chassis to open quickly for service, as well as giving the user a carry handle for portability. Screws are non-anchored for making the build faster.

At Sub3L, this is a 3D Printed complete chassis for the ASRock X300TM-ITX. The cooler height is <47mm and was intended to fit the Thermalright AXP-90 x47

Required hardware: 

Parts breakdown: 

  • 14x m3x6mm screws (4x for motherboard, 2x for carry handle, 8x for USB ports)
  • 20x m3x8mm screws (10x front panel, 10x rear panel)
  • 6x m3x12mm screws (2x for the carry handle to the hinges, 4x for the hinges to the top cover)
  • 8x m3x6mm heat inserts (4x for motherboard tray, 4x for carry handle hinges)
  • 4x m3x6mm standoffs (motherboard)
  • 4x m3x8mm for TPU feet

The top HDMI port is designed for an Amazon Basics HDMI. Please keep this in mind when trying to fit a fat HDMI into the top port. 

If you have any questions or comments, please let me know. I'd love to hear from you. 

 

(photos of this print are of the one in the middle)

 

Tagi