Kürnikotvör - self-opening chicken coop door
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pedal-controlled coop door that saves 50% of the doorkeeper's time. With this door, you don't have to get up early.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 100
- Wydruki
- 1
- Wyświetlenia
- 2810
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial
How does it work:
https://cdn.blog.prusa3d.com/wp-content/uploads/2022/12/VID-20220629-WA0000.gif
The door frame is approx. 400x400mm. Cutting it in PrusaSlicer may be necessary (depending on your printer type).
The pulley wheel should be printed in 3 copies, cutting it in half may save some time and support material.
The cut 3D-printed parts are meant to be glued together, then screwed to the plexiglass and chicken coop. The best way is to insert the plexiglass into the frame, then predrill the holes.
Required plexiglass dimensions: 2x315x385 mm
All holes are for M3 screws and nuts.