1 / 3
300zx Z32 Lower Radiator Hose Pipe Clamp — zdjęcie 1
1 / 3

300zx Z32 Lower Radiator Hose Pipe Clamp

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This clip secure your upgraded aluminum radiator hose directly to the sway bar.

Ocena
0 / 5
Polubienia
10
Pobrania
87
Wydruki
0
Wyświetlenia
955
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

This clip secure your upgraded aluminum radiator hose directly to the sway bar.

A common upgrade for the 1990-1996 Nissan 300zx is to upgrade the lower radiator hose to a solid aluminum pipe. This upgrade at one time used to have a plastic clip to secure that lower hose in place but many people use a zip tie to secure it. The problem with this solution is that it doesn't hold things very tight, and doesn't look good.

This little clip is designed to go between the front sway bar and the lower radiator hose and securely snap them into place. A zip tie still secures it all together in the channel cut into the outside.

This initial design is very much a prototype and is still needs much work, refinement, and testing. Comments, and suggestions welcomed.

Print instructions

Category: Automotive Summary

A common upgrade for the 1990-1996 Nissan 300zx is to upgrade the lower radiator hose to a solid aluminum pipe. This upgrade at one time used to have a plastic clip to secure that lower hose in place but many people use a zip tie to secure it. The problem with this solution is that it doesn't hold things very tight, and doesn't look good.

This little clip is designed to go between the front sway bar and the lower radiator hose and securely snap them into place. A zip tie still secures it all together in the channel cut into the outside.

This initial design is very much a prototype and is still needs much work, refinement, and testing. Comments, and suggestions welcomed.

Print Settings

Printer Brand: Prusa

Printer: i3 MK3

Rafts: No

Supports: Yes

Resolution: 0.1

Infill: 25%

Filament: Prusa ASA Galaxy Black

Tagi