Poly Barrel Bung Cap & Wrench (cross pattern)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement bung and wrench for blue 200L / 55 gallon poly drums with BUTTRESS thread and cross shaped pattern.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 617
- Wydruki
- 1
- Wyświetlenia
- 1928
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
Replacement bung for 210L/55 gallon poly barrels that have a coarse buttress type thread, not NPT fine thread. The OD of the bung cap thread is approx 56mm.
Included in model is a bung cap with/without hole for 1/2" OD hose, and hand wrench without/without a recess that can be used with ½" ratchet. if you don't have a ½" ratchet, I have made the wrench 50mm across flats so you can use this https://www.printables.com/model/255244-coloradodmax-fuel-filter-cap-wrench
Note : The original item has a thick rubber O-Ring to seal the barrel watertight. I don't have access to new O-Rings so these prints were made to reseal the barrels in-situ. I've not tested how watertight they are when a barrel is turned on its side.
STEP files have been also been included in design files