Fatshark FPV gimbal pod

This is a pod I made for my old balsa wood glider RC plane called "Blue Phoenix" from hobbyträ Sweden.

It´s designed for this camera gimbal But other gimbals that uses a servo of same size as base should fit, no guarantee though.
https://hobbyking.com/en\_us/fatshark-700tvl-cmos-fpv-camera-ntsc-pal-with-pan-and-tilt.html

The pod replaces the planes battery hatch and holds the fatshark servo gimbal.
Print the two parts and use M3 nuts and countersunk screws to attach the lip on the bottom of the pod, It´s done this way to have a completely flat base for printing.

I´ve also made a universal version with 4 screw-holes so you can attach it to anything that is more or less flat.

If you print any of these and use them, please share some pictures of it.
Enjoy!

Print instructions

Unassociated tags: hobbyträ

Category: R/C Vehicles Summary

This is a pod I made for my old balsa wood glider RC plane called "Blue Phoenix" from hobbyträ Sweden.

It´s designed for this camera gimbal But other gimbals that uses a servo of same size as base should fit, no guarantee though.
https://hobbyking.com/en\_us/fatshark-700tvl-cmos-fpv-camera-ntsc-pal-with-pan-and-tilt.html

The pod replaces the planes battery hatch and holds the fatshark servo gimbal.
Print the two parts and use M3 nuts and countersunk screws to attach the lip on the bottom of the pod, It´s done this way to have a completely flat base for printing.

I´ve also made a universal version with 4 screw-holes so you can attach it to anything that is more or less flat.

If you print any of these and use them, please share some pictures of it.
Enjoy!

Print Settings

Printer: Anet A8

Rafts: Yes

Supports: No

Resolution: 0,2

Infill: 30%

Notes:

Printed in PLA but should work fine with other materials as well.