Hubbell Cord Reel Won't Retract Fix HBLC40123TT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This Thing is to repair a Hubbell Cord Reel (HBLC40123TT) that will not retract. These are very expensive cord reels…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 468
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This Thing is to repair a Hubbell Cord Reel (HBLC40123TT) that will not retract. These are very expensive cord reels and they should hold up much better than they do. A couple of searches showed I was not the only person to have a problem with this particular manufacturer.
See the attached PDF file for complete instructions.
In my case it was actually a pretty simple fix.
I hope this helps someone keep a cord reel out of the landfill and save some money.
Chuck
Print Settings
Printer Brand:
LulzBot
Printer:
TAZ 5
Rafts:
No
Supports:
No
Infill:
100%
Notes:
I increased my wall count but probably didn't need to with 100% infill. Less might work but I didn't want to take any chances.
Category: Tools