XTool D1 Honeycomb Positioner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two brackets slide onto the feet of the laser and position the Honeycomb Working Panel Set precisely.
- Ocena
- 5 / 5
- Polubienia
- 51
- Pobrania
- 471
- Wydruki
- 2
- Wyświetlenia
- 2302
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted the honeycomb to be consistently located for reliable repeated engraving.
The xTool Honeycomb Riser by cbabbman fit into the 2 brackets I have made. https://www.printables.com/model/252052-xtool-honeycomb-riser Thank you cbabbman!
These are made for the xTool Honeycomb Working Panel Set for the D1. Mine was purchased mid 2022.
I riveted 2 of cbabbman's risers to the Honeycomb frame on the front 2 corners using the existing holes in the honeycomb frame. The risers are slip fit onto the rear 2 corners.
The brackets are a tight fit on the production engraver legs. They slip smoothly onto printed leg extensions as well.
Fusion360 archive included to make modding easy.