Sovol SV04 Buildplate Logo (Cura 5.0.0)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
In Cura 5.0.0 there are no buildplate logos for the Sovol SV04, so I have created five suitable ones.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 124
- Wydruki
- 0
- Wyświetlenia
- 686
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I am currently using Cura 5.0.0 as slicer. Unfortunately Cura does not show any logo for the Sovol SV04 on the respective buildplate. Therefore, I have created five logos:
- SV04_Dual_Mode
- SV04_Copy_Mode
- SV04_Mirror_Mode
- SV04_Single_Mode_01
- SV04_Single_Mode_02
The STL files should be copied to the following folder:
Windows > Program Files > Ultimaker Cura 5.0.0 > share > cura > resources > meshes
Additionally the five different Sovol SV04 ".def.json" files (in the definitions folder) have to be changed; this can be done e.g. with Notepad++.
After starting Cura you should then see the respective buildplate with the desired logo.