1 / 2
Toddler proved lock for Magnetic door handle for lack enclosure v2 — zdjęcie 1
1 / 2

Toddler proved lock for Magnetic door handle for lack enclosure v2

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This adds a clip to the magnetic door handle for lack to lock the doors. Toddler proved!

Ocena
0 / 5
Polubienia
13
Pobrania
28
Wydruki
0
Wyświetlenia
634
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

My toddlers are always very excited when the 3D printer starts moving. They learned to open the enclosure's magnetically secured doors! So I had to redesign the door handles and add a clip to securely latch the doors. Now they can pull as much as they want, the doors stay closed.

This is a remix of Magnetic door handle for lack enclosure v2. The Right-Front part is redesigend and has now a moveable clip.

Building instruction

For 2 locks you need:

Parts:
2 x M3x14 screw
2 pieces 1.75 mm filament

3D printed parts:
2 x Right-Front-Lock
2 x Lock
 

Construction:
Print out the 3D parts, see printing instructions.
Fix the lock part to the Right-Front-Lock part with the M3x14 screw. Now replace the original small Right-Front part with the enhanced part. Close the doors and secure the lock with piece of filament.
 

Print instructions

Printed in PETG with standard Prusament settings on Prusa MK3S printer

Slicing settings:

Infill
15 %

Supports
No supports

Brim
No brim

Print settings:

Filament
Prusament PETG

Nozzle
0.4 mm

Layer thickness
0.2 mm

Temperatures
Extruder: 250 °C (1st layer 240 °C)
Bed: 90 °C (1st layer 85 °C)

 

Important!

Use at your own risk! Never leave your toddlers alone with a heated and moving 3D printer!