Makita Battery to Einhell PowerXChange Device
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A stable and easy to print adapter to use your Makita batteries with Einhell PowerXChange tools. Fit is pretty thight…
- Ocena
- 0 / 5
- Polubienia
- 51
- Pobrania
- 480
- Wydruki
- 1
- Wyświetlenia
- 2249
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A stable and easy to print adapter to use your Makita batteries with Einhell PowerXChange tools.
Fit is pretty thight but not sticking.
Included the supports for the Makita locking in the drawing to save supportmaterial.
Simply remove it with small pliers after printing.
I used a 0.7mm copper sheet. Everything up to 1mm is possible. Drawing for the copper sheets is included. You'll two of each.
After bending the copper sheet you have to solder it.
Remix of https://www.thingiverse.com/thing:4948117 and https://www.thingiverse.com/thing:3993003
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
30%
Filament: Prusament PETG Black
Notes:
Printed with 3 perimeters. Supports only for Einhell side. (see picture)
Simply remove the support at the Makita locking.
Category: Tools