1 / 8
Intex Steel Frame Pool Wooden surrounding Slip in holder. — zdjęcie 1
1 / 8

Intex Steel Frame Pool Wooden surrounding Slip in holder.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Holder for attaching planks aroung a 10 cornered Steel frame pool.

Ocena
0 / 5
Polubienia
16
Pobrania
37
Wydruki
0
Wyświetlenia
631
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

We needed to build some protective surrounding for our Intex Steel Frame Pool because it has to stand partialy under ground level.

This Holders are tight fitted for the horizontal steel pipes around the pool. The angles of the holders should fit any Steel frame pool with 10 corners.

Could also be used for making a complete Wooden cover arround the pool.

There are two parts. 

Befestigungsklipp v7 is for the first and last plank. (Silver part)

Befestigungsklipp Verbinder v5 is for attaching two planks on top of each other. (Dark Gray part)

My first try was in PLA. Those lasted for 2 Years.

I've reprinted them this year in ASA. 

Also made the parts a bit longer to give the screws more space to distribute the loads on the parts.

Printed in 0.3m layer Height and with 4 perimeters.

Tagi