Box for END-CNC´s MQL pump controller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed this box for the Pump controller from END-CNC´s MQL System. Slide the Cables through the glands (M20 for I/O…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 264
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Designed this box for the Pump controller from END-CNC´s MQL System.
Slide the Cables through the glands (M20 for I/O from machine controller / M12 for two solenoids and the stepper) and wire it to the Board.
The two boards just slide in, lid is attached, Potentiometers are secured with the nuts and knobs are pressed on.
You also need:
4x Ruthex thread Insert M4x8,1
4x Socket Head cap screw M4x12mm
3x Lapp Skintop M12x1,5 cable gland with Nut
1x Lapp Skintop M20x1,5 cable gland with Nut
.f3d and .step of an assembly attached for easy modifing.
+added a bracket to mount the Box somewhere with two M5 Socket Head cap screws.
Print Settings
Printer:
CTC Bizer Dual
Resolution:
0,2
Infill:
20%
Filament:
Goedis PETG
SuperBlue
Notes:
Print Box with the Opening up and lid with "Spitmode" facing up.
Category: Electronics