1 / 1
Punisher Stencil v1
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Punisher Stencil, Version 1 which almost maxes out build plate.
- Ocena
- 0 / 5
- Polubienia
- 19
- Pobrania
- 132
- Wydruki
- 0
- Wyświetlenia
- 423
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (22)Powiązane
Punisher Stencil, Version 1 which almost maxes out build plate, depending on printer. This is done “Reverse” so you can print, place on object, and then paint right overtop of the outline, resulting in a punisher logo. It can also be reused!
No supports needed, would suggest putting tape or other barrier around the sides to prevent overspray.
See version 2 for one that is a little more proportionate of the actual punisher logo.