Sunlu Filadryer S2 LCD Cover v3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A print-in-place hinged S2 Filadryer cover featuring a few tweaks as mentioned in the description
- Ocena
- 5 / 5
- Polubienia
- 36
- Pobrania
- 158
- Wydruki
- 3
- Wyświetlenia
- 1125
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a print-in-place cover for the S2's screen. I have attached mine with some hot glue, but others have attached with a command strip. Velcro might also be another option.
I would HIGHLY suggest printing in a dark color filament (I used matte black) if you don't want bleed through. Otherwise, perhaps consider increasing the infill.
A few changes to the hinged cover
-the hinge base is curved so there isn't a bunch of overhang
-all of the surfaces have been evened out
-made the hinge part smaller