Sunlu Filadryer S2 filament guide and moisture vent with Bowden passthrough
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wedge to help better guide filament and vent moisture out of the S2 filament dryer, with a Bowden passthrough
- Ocena
- 4 / 5
- Polubienia
- 42
- Pobrania
- 244
- Wydruki
- 2
- Wyświetlenia
- 2580
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I liked the original minimalist design of the wedge, but ran into some issues with it not staying secured to the Bowden tube and the dryer itself, so I added 2 set screws for holding onto these parts.
I also added a M6 tap for a Bowden passthrough.
This remix is not without its issues - the internal tube doesn't have the space to straighten out before hitting the passthrough, so filament sometimes requires a bit of coaxing to get through.
I'm already pushing rope uphill with the mix of STL and OpenSCAD, so I likely won't ever get to it unless it becomes a serious problem.