Frame bumper for Tiny Trainer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Integrated Frame bumper and canopy cover clip for Tiny Trainer v1
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 280
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I'm tired of cutting and replacing zip-ties for the canopy every time I need to work on the electronics under the canopy of my Tiny Trainer v1. This integrated bumper/tie-down kills 2 birds with 1 stone.
Unlike traditional bumper design this one requires installation from above, which means prop off. To unclip the canopy, undo the bumper around the frame first.
Printed with TPU at 0.2mm layer height, 2 walls, 100% infill. Enable overhang setting at reduced speed.
2023-03-03: Uploaded version 2 with widened strap and upper rim to prevent popping out of position on hard crashes. This also means it's harder to pop the frame bumper in place. Here's a video illustration on how it's done.
2023-04-06: Uploaded version 2.1 for both 2.5mm and 3mm frames.