Sealing ring for watch - 38x0,8 - TPU shore hardness 85A
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When my watch got wet, the glass was foggy after a while. So I have created this spare part to replace the old O-ring.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 293
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Men
- Licencja
- Creative Commons — Attribution — Noncommercial
The O-ring is printed with Extrudr semisoft (shore hardness 85A) and do not need supports. For printing, I recommend to place the flat surface to the print bed.
To replace the O-ring, you should slightly grease the O-ring e.g. with silicon grease, for easier assembly. The picture show the assembled O-ring (white).
If you need a tool to replace the lid, have a look to: Tool to open lid of a watch e.g. for Fossil von H3dSprint | Kostenloses STL-Modell herunterladen | Printables.com