Customizable puzzle of evil
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This evil puzzle will keep you busy! And you can write customized text on it to give it away as a gift
- Ocena
- 4,667 / 5
- Polubienia
- 61
- Pobrania
- 314
- Wydruki
- 9
- Wyświetlenia
- 2061
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This Evil Puzzle will keep you busy for many many hours. Simply place the four puzzle pieces within the available space. There is an easy and a hard option.
Credits & Features
This design is based on hairyfacedhoomans puzzle, where i adjusted some things:
- Increased wiggle in the hinge to improve opening/closing the clamshell
- recessed the magnets (two layers or .4mm of “cap” on the magnet so they dont show)
- changed magnet size to height 2.7mm, diameter 6mm (the ones i had available)
- added text on both sides of the clamshell design, in case you want to use it as a present
Customization
Use OpenSCAD to change the magnet size and text!
Just put the .scad and the “evil_puzzle_-_no_magnets.stl” file in a folder. Then start OpenSCAD.
Text customization:
Change the variables: text1=" Dear Friend,";
Printing
Recessed magnets:
Make a material change at layer 29, at 5,8mm (when you print with .2mm layer height):
When the printer stops, put in the magnets and fix them with a drop of superglue.
With the two layers the magnets are barely visible:
