Protective Rubber Pads for Smallrig Super Clamp / Magic Arm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Printable replacement pads for the Smallrig Magic Clamp
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 899
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I bought this Clamp, Ball-mount, arm thing from Smallrig. Unfortunately the protective pads inside the clamp are made of hard plastic shich slips on metal surfaces. So the clamp would never hold tight enough when mounted to anything that moves.
Which is why I designed these replacemnt pads that can be printed in TPU as an anti-slip-solution. The original pads are secured with a bit of glue but can easily be levered up with a knife ant then taken off. Afterwards simply push the replacements into the slots on the clamp.
For me the replacements stay seated very well even without glue, but you might want to add a but just for extra sefety.