Exhaust Filter for Phrozen Mini 4k
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Filter enclosure for a Phrozen Mini 4k. You still have to place the printer in a ventialted area. But with…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 211
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a Filter enclosure for a Phrozen Mini 4k. You still have to place the printer in a ventialted area. But with the filter the smells are less. I also turned the Fan around. It was blowing Air into the machine. With the first test-print of 2,5 hours there wasn't a problem with the ventilation inside the machine. Plenty of air was still sucked into the machine from the side.
For the filter I used some Carbon filter I had laying around for my soldering filter system.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15
Filament: PLA PLA Black
Category: 3D Printer Parts