Overhang Test for Detailed prints
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
With this model you can test the overhang printing compatibilities of your printer.
- Ocena
- 5 / 5
- Polubienia
- 91
- Pobrania
- 1558
- Wydruki
- 15
- Wyświetlenia
- 7996
- Oceny
- 14
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Share Alike
This is my new design to test your printers part cooling fan performance.
This model is designed for detailed prints, where the overhangs are small.
It test for 40, 30, 20 and 10° overhangs.
This is a quick print, takes about 35 mins.
Important: set the seam to an “inner” corner (aligned)!
Pay attention to the text on the bottom side, when placing it on the printbed. It will help you identify the x and y directions later.
If you found it useful, give it a like!
Check out my other test model:
https://www.printables.com/model/342481-overhang-test-regular
Note: mine was printed on an Ender 3 Pro, with a Voron Stealthburner printhed.